© 2001 Fairchild Semiconductor Corporation DS500219 www.fairchildsemi.com
March 1999
Revised January 2001
NC7WZ14 TinyLogi c
UHS Dual Inverter with Schmitt Trigger Inputs
NC7WZ14
TinyLogic UHS Dual Inverter with
Schmitt Trigg er Inputs
General Description
The NC7W Z14 is a dual inver ter with Schmit t trigger input
from Fairchild’s Ultra High Speed Series of TinyLogic in
the space savin g SC70 6-le ad package. Th e dev ice is fab-
ricated with advanced CMOS technology to achieve ultra
high speed with high output drive while maintaining low
static power dissipation over a very broad VCC operating
range. Th e device is s peci f ied to op erate over the 1.6 5V to
5.5V VCC range. The inputs and outputs are high imped-
ance when VCC is 0V. Inputs tolerate voltages up to 7V
independent of VCC operating voltage. Schmitt trigger
inputs achieve typically 1V hysteresis between the positive-
going and negative-going input threshold voltage at 5V
VCC.
Features
■Space savin g SC70 6-lead pack a ge
■Ultra High Speed: tPD 3.2 ns Typ into 50 pF at 5V VCC
■High Output Drive: ±24 mA at 3V VCC
■Broad VCC Operating Range; 1.65V to 5.5V
■Matches the performance of LCX when operated at
3.3V VCC
■Power down high impedance inputs/outputs
■Overvoltage tolerant inputs facilitate 5V to 3V translation
■Patented noise/EMI reduction circuitry implemented
Ordering Code:
Logic Symbol
IEEE/IEC
Pin Descriptions
Function Table
Y = A
H = HIGH Logic Level
L = LOW Logic Le v el
Connection Diagrams
(Top View)
Pin One Orientation Diagram
AAA represents Product Code Top Mark - see ordering code
Note: Orientation of Top Mark determines Pin One location. Read the top
produc t co de mark lef t to right, Pin On e is t he lower lef t p in (s ee diagra m ).
TinyLogic is a tr ademark of Fair c hild Sem iconduct or Corporat ion.
Order Package Product Code Packag e Descript ion Supp lie d As
Numbe r Numbe r Top Mark
NC7WZ14P6 MAA06A Z14 6-Lead SC70, EIAJ SC88, 1.25mm Wide 250 Units on Tape and Reel
NC7WZ14P6X MAA06A Z14 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel
Pin Names Description
A1, A2Data Inputs
Y1, Y2Output
Input Output
AY
LH
HL
www.fairchildsemi.com 2
NC7WZ14
Absolute Maximum Ratings(No te 1) Recommended Operating
Conditions (Note 2)
Note 1: Absolute maxi mum rat ings are DC val ues beyo nd which the devi ce
may be d ama ged or hav e it s u sef ul lif e im pai red . Th e data shee t sp ecif ica-
tions should be met, without exception, to ensure that the system design is
reliable over its power supply, temperature, and output/input loading vari-
ables. F airchild does not re commend ope ration outside da tasheet specifi-
cations.
Note 2: Unu s ed inputs m ust be he ld H I GH or LOW. They ma y not fl oat.
DC Electrical Characteristics
Supply Voltage (VCC)−0.5V to +7V
DC Input Voltage (VIN)−0.5V to +7V
DC Output Voltage (VOUT)−0.5V to +7V
DC Input Diode Current (IIK)
@ VIN < −0.5V −50 mA
DC Output Diode Current (IOK)
@ VOUT < −0.5V −50 mA
DC Output Current (IOUT)±1 00 mA
DC VCC/GND Current (ICC/IGND)±50 mA
Storage Temperature (TSTG)−65°C to +150°C
Junction Temperature under Bias (TJ) 150°C
Junction Lead Temperature (TL)
(Solder ing, 10 seco nds) 260°C
Power Dissipation (PD) @ +85°C 180 mW
Supply Voltage Operating (VCC) 1.65V to 5.5V
Supply Voltage Data Retention (VCC) 1.5V to 5.5V
Input Voltage (VIN)0V to 5.5V
Output Voltage (VOUT) 0V to VCC
Operating Temperature (TA)−40°C to +85°C
Thermal Resistance (θJA)350°C/W
Symbol Parameter VCC TA = +25°CT
A = −40°C to +85°CUnits Conditions
(V) Min Typ Max Min Max
VPPositive Threshold 1.65 0.6 1.4 0.6 1.4
V
Voltage 1.8 0.7 1.5 0.7 1.5
2.3 1.0 1.8 1.0 1.8
3.0 1.3 2.2 1.3 2.2
4.5 1.9 3.1 1.9 3.1
5.5 2.2 3.6 2.2 3.6
VNNegative Threshold 1.65 0.2 0.5 0.8 0.2 0.8
V
Voltage 1.8 0.25 0.56 0.9 0.25 0.9
2.3 0.40 0.75 1.15 0.40 1.15
3.0 0.6 0.98 1.5 0.6 1.5
4.5 1.0 1.42 2.0 1.0 2.0
5.5 1.2 1.68 2.3 1.2 2.3
VHHysteresis Voltage 1.65 0.1 0.48 0.9 0.1 0.9
V
1.8 0.15 0.51 1.0 0.15 1.0
2.3 0.25 0.62 1.1 0.25 1.1
3.0 0.4 0.76 1.2 0.4 1.2
4.5 0.6 1.01 1.5 0.6 1.5
5.5 0.7 1.20 1.7 0.7 1.7
VOH HIGH Level Output 1.65 1.55 1.65 1.55
V
VIN = VIL IOH = −100 µA
Voltage 1.8 1.7 1.8 1.7
2.3 2.2 2.3 2.2
3.0 2.9 3.0 2.9
4.5 4.4 4.5 4.4
1.65 1.29 1.52 1.29 IOH = −4 mA
2.3 1.9 2.14 1.9 IOH = −8 mA
3.0 2.4 2.75 2.4 IOH = −16 mA
3.0 2.3 2.62 2.3 IOH = −24 mA
4.5 3.8 4.13 3.8 IOH = −32 mA
3 www.fairchildsemi.com
NC7WZ14
DC Electrical Characteristics (Continued)
AC Electrical Characteristics
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic op erating cu rrent by the ex pressio n:
ICCD = (CPD)(VCC)(fIN) + (ICCstatic).
AC Loading and Waveforms
CL include s l oad and str ay c apacitan ce
Input PRR = 1.0 MHz; t W = 500 ns
FIGURE 1. AC Test Circuit
Input = AC Wav efo r m; tr = tf = 1.8 ns ;
PRR = variable; D ut y Cycle = 50%
FIGURE 2. ICCD Test Circuit
FIGURE 3. AC Waveforms
Symbol Parameter VCC TA = +25°CT
A = −40°C to +85°CUnits Conditions
(V) Min Typ Max Min Max
VOL LOW Level Output 1.65 0.0 0.1 0.1
V
VIN = VIH IOL = 100 µA
Voltage 1.8 0.0 0.1 0.1
2.3 0.0 0.1 0.1
3.0 0.0 0.1 0.1
4.5 0.0 0.1 0.1
1.65 0.08 0.24 0.24 IOL = 4 mA
2.3 0.10 0.3 0.3 IOL = 8 mA
3.0 0.16 0.4 0.4 IOL = 16 mA
3.0 0.24 0.55 0.55 IOL = 24 mA
4.5 0.25 0.55 0.55 IOL = 32 mA
IIN Input Leakage Current 0 to 5.5 ±0.1 ±1.0 µAV
IN = 5.5V, GND
IOFF Power Off Leakage Current 0.0 1 10 µAV
IN or VOUT = 5.5V
ICC Quiescent Supply Current 1.65 to 5.5 1.0 10 µAV
IN = 5.5V, GND
Symbol Parameter VCC TA = +25°CT
A = −40°C to +85°CUnits Condi tion s Fig. No.
(V) Min Typ Max Min Max
tPLH Propagation Delay 1.65 2.5 7.6 13.1 2.5 14.5
ns Figures
1, 3
tPHL 1.8 2.5 6.3 10.9 2.5 12
2.5 ± 0.2 1.8 4.3 7.4 1.8 8.1 CL = 15 pF,
3.3 ± 0.3 1.5 3.3 5.0 1.5 5.5 RL = 1 MΩ
5.0 ± 0.5 1.0 2.7 4.1 1.0 4.5
tPLH Propagation Delay 3.3 ± 0.3 1.8 4.0 6.0 1.8 6.6 ns CL = 50 pF, Figures
1, 3
tPHL 5.0 ± 0.5 1.2 3.2 4.9 1.2 5.4 RL = 500Ω
CIN Input Capacitance 0 2.5 pF
CPD Power Dissipation 3.3 11 pF (Note 3) Figure 2
Capacitance 5.0 12.5
www.fairchildsemi.com 4
NC7WZ14
Tape and Reel Specification
TAPE FORM AT
TAPE DIMENSIONS inches (millimeters)
Package Tape Number Cavity Cover Tape
Designator Section Cavities Status Status
Leader (Start End) 125 (typ) Empty Sealed
P6 Carrier 250 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Leader (Start End) 125 (typ) Empty Sealed
P6X Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Package Tape Size DIM A DIM B DIM F DIM KoDIM P1 DIM W
SC70-6 8 mm 0.093 0.096 0.138 ± 0.004 0.053 ± 0.004 0.157 0.315 ± 0.004
(2.35) (2.45) (3.5 ± 0.1 0) (1.35 ± 0.10) (4) (8 ± 0.1)
5 www.fairchildsemi.com
NC7WZ14
Tape and Reel Specification (Continu ed)
REEL DIMENSIONS inches (millimeters)
Tape
Size ABCDN W1 W2 W3
8 mm 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/ −1.00)
www.fairchildsemi.com 6
NC7WZ14 TinyLogic
UHS Dual Inverter with Schmitt Trigger Inputs
Physical Dimensions inches (millimeters) unless otherwise noted
6-Lead SC70, EIAJ SC88, 1.25mm Wide
Package Number MAA06A
Fairchild does not assu me any responsibility for use of any circuitry de scribed, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r syste ms are devices or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical compon ent i n any compon ent of a lif e supp ort
device or system whose failure to perform can be rea-
sonabl y ex pect ed to ca use the fa ilu re of the li fe su pp ort
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
