Power PhotoMOS (AQZ10D, 20D) A voltage-sensitive PhotoMOS relay. DC load type is available. FEATURES 3.5 .138 21 .827 12.5 .492 mm inch 1 - 2 3 + 4 AC/DC type 1 - 2 3 + - 4 + 1. A voltage sensitive power PhotoMOS relay Conventional power PhotoMOS relays are connected externally to an input limiting resistor in order to obtain the appropriate LED current. Adding an internal constant-current element renders the input limiting resistor unnecessary, making it possible for the PhotoMOS relay to be voltage driven. 2. Wide range of input voltages Allows a wide range of input voltages from 4 to 30 V DC. The relay can be used in 5 V, 12 V or 24 V DC systems. 3. Large capacity PhotoMOS relay Supports the various types of load control, from very small loads to a maximum 2.7 A for the AC/DC dual type, 3.6 A for the DC-only type. 4. Both AC/DC dual types and DC-only types are available The AC/DC dual type is capable of bidirectional control, and unlike conventional SSRs, does not have to be used differently depending on the load. The DC-only type is well suited for control of DC solenoids and DC motors. 5. High sensitivity, low ON resistance A maximum 3.6 A load can be controlled with the minimum input voltage of 4 V DC. The ON resistance is also low at 0.09 (AQZ102D). 6. Small scale, slim type, 4-pin SIL Length 21.0 mmxwidth 3.5 mmxheight 12.5 mm. High precision mounting is possible because of the small 73.5mm2 area of the 4-pin SIL. DC type TYPES 1. AC/DC type Output rating Load voltage 60 V 100 V 200 V 400 V Load current 2.7 A 1.8 A 0.9 A 0.45 A Part No. AQZ202D AQZ205D AQZ207D AQZ204D Packing quantity Inner carton Outer carton 25 pcs. 500 pcs. 2. DC type Output rating Load voltage 60 V 100 V 200 V 400 V Load current 3.6 A 2.3 A 1.1 A 0.6 A Part No. AQZ102D AQZ105D AQZ107D AQZ104D Packing quantity Inner carton Outer carton 25 pcs. 500 pcs. Notes: Load voltage and current of AC/DC type: Peak AC/DC. Load voltage and current of DC type: DC. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Power PhotoMOS (AQZ10D, 20D) RATING 1. AC/DC type 1) Absolute maximum ratings (Ambient temperature: 25C 77F) Item Input voltage Input reverse voltage Power dissipation Load voltage (Peak AC) Continuous load current (Peak AC) Peak load current Power dissipation Total power dissipation I/O isolation voltage Input Output Temperature limits Symbol VIN VRIN Pin VL IL Ipeak Pout PT Viso Operating Topr Storage Tstg AQZ202D AQZ205D AQZ207D AQZ204D 30 V 5V 300 mW 60 V 100 V 200 V 400 V 2.7 A 1.8 A 0.9 A 0.45 A 9.0 A 6.0 A 3.0 A 1.5 A 1.6 W 1.6 W 2,500 V AC -40C to +85C -40F to +185F (4 V q VIN q 6 V) -40C to +75C -40F to +167F (6 V < VIN q 15 V) -40C to +60C -40F to +140F (15 V < VIN q 30 V) -40C to +100C -40F to +212F Remarks 100 ms (1 shot), VL = DC Non-condensing at low temperatures 2) Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Operate voltage Input Turn off voltage Input current Typical Maximum Minimum Typical Typical VFon VFoff IIN Typical On resistance Ron Maximum Output Off state leakage current Maximum AQZ205D AQZ207D 1.4 V 4V 0.8 V 1.3 V 6.5 mA 0.180 0.64 2.4 0.18 0.34 1.1 3.2 2.7 ms 2.3 ms 10 A 5.8 ms 4.2 ms Ton Maximum Switching speed AQZ204D 0.066 Ileak Typical Turn on time* AQZ202D 10.0 ms Remarks IL = 100 mA VL = 10 V IL = 100 mA VL = 10 V VIN = 5 V VIN = 5 V IL = Max. Within 1 s on time VIN = 0 V VL = Max. VIN = 5 V IL = 100 mA VL = 10 V 3.0 ms VIN = 5 V IL = 100 mA VL= 10 V Ciso 0.8 pF 1.5 pF f = 1 MHz VB = 0 V Minimum Riso 1,000 M 500 V DC Maximum -- Vibration resistance Minimum Shock resistance Minimum Recommendable LED forward current IF = 5 to 10 mA. *Turn on/off time -- -- Typical Turn off time* Transfer characteristics 0.2 ms 0.1 ms Toff Maximum I/O capacitance Typical Maximum Initial I/O isolation resistance Maximum operating speed VIN= 5 V Duty factor = 50% ILxVL = 200 (VA) 10 to 55 Hz at double amplitude of 3 mm 2 hours for 3 axes 4,900 m/s2 {500 G}1 ms 3 times for 3 axes For type of connection 0.5 cps Input 90% Output 10% Ton Toff 2. DC type 1) Absolute maximum ratings (Ambient temperature: 25C 77F) Input Output Temperature limits Item Input voltage Input reverse voltage Power dissipation Load voltage (DC) Continuous load current (DC) Peak load current Power dissipation Total power dissipation I/O isolation voltage Symbol VIN VRIN Pin VL IL Ipeak Pout PT Viso Operating Topr Storage Tstg AQZ102D AQZ105D AQZ107D AQZ104D 30 V 5V 300 mW 60 V 100 V 200 V 400 V 3.6 A 2.3 A 1.1 A 0.6 A 9.0 A 6.0 A 3.0 A 1.5 A 1.35 W 1.35 W 2,500 V AC -40C to +85C -40F to +185F (4 V q VIN q 6 V) -40C to +75C -40F to +167F (6 V < VIN q 15 V) -40C to +60C -40F to +140F (15 V < VIN q 30 V) -40C to +100C -40F to +212F All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Remarks 100 ms (1 shot), VL = DC Non-condensing at low temperatures Power PhotoMOS (AQZ10D, 20D) 2) Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical Maximum Minimum Typical Typical Operate voltage Input Turn off voltage Input current AQZ102D VFon VFoff IIN Typical On resistance Ron Maximum Output Off state leakage current Maximum 3.0 ms VIN = 5 V VIN = 5 V IL = Max. Within 1 s on time VIN = 0 V VL = Max. VIN = 5 V IL = 100 mA VL = 10 V VIN = 5 V IL = 100 mA VL= 10 V 1.23 0.09 0.17 0.55 1.6 1.5 ms 1.2 ms 10 A 2.2 ms Ton 10.0 ms Typical Turn off time* 0.2 ms 0.1 ms Toff Maximum Transfer characteristics IL = 100 mA VL = 10 V 0.33 3.3 ms Remarks IL = 100 mA VL = 10 V 0.090 Maximum Switching speed AQZ104D 0.033 Ileak Typical Turn on time* AQZ105D AQZ107D 1.4 V 4V 0.8 V 1.3 V 6.5 mA I/O capacitance Typical Maximum Ciso 0.8 pF 1.5 pF f = 1 MHz VB = 0 V Initial I/O isolation resistance Minimum Riso 1,000 M 500 V DC Maximum operating speed Maximum -- 0.5 cps Minimum Minimum -- -- 10 to 55 Hz at double amplitude of 3 mm 4,900 m/s2 {500 G}1 ms Vibration resistance Shock resistance Recommendable LED forward current IF = 5 to 10 mA. *Turn on/off time VIN= 5 V Duty factor = 50% ILxVL = 200 (VA) 2 hours for 3 axes 3 times for 3 axes For type of connection Input 90% Output 10% Ton Toff For Dimensions For Schematic and Wiring Diagrams For Cautions for Use REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2.-(1) Load current vs. ambient temperature characteristics in adjacent mounting 2.-(2) Load current vs. ambient temperature characteristics in adjacent mounting Allowable ambient temperature: -40C to +85C -40F to +185F; VIN: Input voltage; IL (derate):Load current (derate); IL: Absolute maximum ratings of continuous load current Input voltage: 4V q VIN q 6V; IL (derate): Load current (derate); IL: Absolute maximum ratings of continuous load current; : Adjacent mounting pitch Input voltage: 6V < VIN q 15V; IL (derate): Load current (derate); IL: Absolute maximum ratings of continuous load current; : Adjacent mounting pitch 4V VIN 6V 6V<VIN 15V 15V<VIN 30V 60 40 80 =20mm =10mm = 5mm 0 20 40 60 80 85 100 Ambient temperature, C 40 40 0 -40 -20 =20mm =10mm = 5mm 80 60 60 20 20 20 0 -40 -20 IL (derate) x 100, % IL IL (derate) x 100, % IL 100 80 100 100 IL (derate) x 100, % IL 120 0 20 40 60 80 85 100 Ambient temperature, C 0 -40 -20 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 0 20 40 60 7580 100 Ambient temperature, C Power PhotoMOS (AQZ10D, 20D) 2.-(3) Load current vs. ambient temperature characteristics in adjacent mounting 3.-(1) On resistance vs. ambient temperature characteristics (AC/DC type) 3.-(2) On resistance vs. ambient temperature characteristics (AC/DC type) Input voltage: 15V<VIN q 30V; IL (derate): Load current (derate); IL: Absolute maximum ratings of continuous load current; : Adjacent mounting pitch Input voltage: 5 V; Continuous load current: 2.7 A (DC) (AQZ202D) 1.8 A (DC) (AQZ205D) Input voltage: 5 V; Continuous load current: 0.9 A (DC) (AQZ207D) 0.45 A (DC) (AQZ204D) 80 60 On resistance, =20mm =10mm = 5mm 40 0.5 5.0 0.4 4.0 0.3 AQZ205D 0.2 0.1 20 0 -40 -20 0 0 20 40 60 80 100 Ambient temperature, C On resistance, IL (derate) x 100, % IL 100 -20 AQZ204D 2.0 1.0 AQZ202D -40 3.0 0 0 20 40 60 80 85 Ambient temperature, C AQZ207D -40 -20 0 20 40 60 80 85 Ambient temperature, C 3.-(3) On resistance vs. ambient temperature characteristics (DC type) 3.-(4) On resistance vs. ambient temperature characteristics (DC type) 4.-(1) Turn on time vs. ambient temperature characteristics (AC/DC type) Input voltage: 5 V; Continuous load current: 3.6 A (DC) (AQZ102D) 2.3 A (DC) (AQZ105D) Input voltage: 5 V; Continuous load current: 1.1 A (DC) (AQZ107D) 0.6 A (DC) (AQZ104D) Input voltage: 5 V; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 0.20 4.0 8 0.15 AQZ105D 0.10 0.05 Turn on time, ms 10 On resistance, 5.0 On resistance, 0.25 3.0 2.0 AQZ104D 1.0 AQZ102D AQZ202D 6 AQZ205D 4 AQZ207D AQZ204D 2 AQZ107D 0 -40 -20 0 0 20 40 60 80 85 Ambient temperature, C -40 -20 0 0 20 40 60 80 85 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 5.-(1) Turn off time vs. ambient temperature characteristics (AC/DC type) 5.-(2) Turn off time vs. ambient temperature characteristics (DC type) Input voltage: 5 V; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Input voltage: 5 V; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Input voltage: 5 V; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 0.5 0.5 8 0.4 0.4 6 AQZ102D 4 Turn off time, ms 10 Turn off time, ms Turn on time, ms 4.-(2) Turn on time vs. ambient temperature characteristics (DC type) 0.3 0.2 AQZ204D AQZ202D 0.3 0.2 AQZ107D AQZ102D AQZ105D 2 AQZ205D 0.1 AQZ107D 0.1 AQZ207D AQZ104D AQZ105D AQZ104D 0 -40 -20 0 0 0 20 40 60 8085 Ambient temperature, C -40 -20 0 0 20 40 60 80 85 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 7. Turn off voltage vs. ambient temperature characteristics 8. Input current vs. ambient temperature characteristics Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Input voltage: 5 V 5.0 10 4.0 4.0 8 3.0 2.0 1.0 0 Input current, mA 5.0 Turn off voltage, ms Operate voltage, V 6. Operate voltage vs. ambient temperature characteristics 3.0 2.0 1.0 -40 -20 0 20 40 60 80 85 Ambient temperature, C 0 6 4 2 -40 -20 0 20 40 60 8085 Ambient temperature, C All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C Power PhotoMOS (AQZ10D, 20D) 9.-(2) Current vs. voltage characteristics of output at MOS portion (DC type) 10. Input current vs. input voltage characteristics Ambient temperature: 25C 77F Ambient temperature: 25C 77F Ambient temperature: 25C 77F 4.0 4.0 3.0 AQZ202D 3.0 Current, A AQZ205D 2.0 AQZ207D AQZ204D 1.0 10 AQZ102D AQZ105D Input current, mA Current, A 9.-(1) Current vs. voltage characteristics of output at MOS portion (AC/DC type) 2.0 AQZ107D AQZ104D 1.0 -0.8 -0.6 -0.4 -0.2 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 Voltage, V 0 2.0 0.2 -1.0 -1.0 -2.0 -2.0 -3.0 -3.0 -4.0 -4.0 0.4 0.6 Voltage, V 0.8 8 6 4 2 0 0 5 10 15 20 25 Input voltage, V 30 11.-(1) Off state leakage current vs. load voltage characteristics 11.-(2) Off state leakage current vs. load voltage characteristics 12. Maximum operating speed vs. load voltage x load current characteristics Ambient temperature: 25C 77F Ambient temperature: 25C 77F Input voltage: 5V; Ambient temperature: 25C 77F 10-6 10-9 AQZ105D,205D Maximum operating speed, cps Off state leakage current, A Off state leakage current, A 10 10-3 10-3 10-6 10-9 AQZ104D,204D AQZ107D,207D AQZ102D,202D 10-12 0 10-12 50 50 13.-(2) Output capacitance vs. applied voltage characteristics (DC type) Frequency: 1 MHz; Ambient temperature: 25C 77F Frequency: 1 MHz; Ambient temperature: 25C 77F 2000 2000 1800 1800 Output capacitance, pF Output capacitance, pF 6 5 4 3 2 0 100 13.-(1) Output capacitance vs. applied voltage characteristics (AC/DC type) 1600 1400 1200 1000 AQZ202D 600 0 25 50 75 100 125 150 175 200 Maximum voltage, VxLoad current, A 1600 1400 1200 AQZ102D 1000 800 AQZ105D 600 AQZ205D AQZ207D 400 0 20 40 60 80 Applied voltage, V AQZ107D 400 AQZ204D 200 0 7 Load voltage, V Load voltage, V 800 8 1 0 100 duty=50% 9 AQZ104D 200 0 100 0 20 40 60 80 Applied voltage, V 100 ACCESSORY mm inch PC board pattern (BOTTOM VIEW) Standard type Socket 1 2 3 4 5 6 5+0.2 -0.6 .197.008 -.024 1 0.5 .020 3 4 5 6 5+0.2 -0.6 .197.008 -.024 22.60.6 .890.024 22.60.6 .890.024 4 .157 2 0.8 .031 2.54 .100 6.35 .250 PA1a-PS 3.81 .150 2.54 .100 90.6 .354.024 90.6 .354.024 5.30.6 .209.024 5.30.6 .209.024 (0.3) (.012) 5.08 .200 0.25 .010 1.23 .048 10.25 .039.010 1.23 .048 3.9 .154 0.5 .020 2.54 .100 6.35 .250 0.8 .031 3.81 .150 (0.3) (.012) 5.08 .200 10.16 .400 5.08 .200 2-1 dia. 2-.039 dia. 2-1.2 dia. 2-.047 dia. Self clinching type 2.54 .100 1.30.15 .051.006 PA1a-PS-H All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 10.16 .400 2-0.80.25 dia. 2-.031002 dia. 5.08 .200 2-1.20.05 dia. 2-.047002 dia. Tolerance: 0.1 .004