1
80
85
90
95
100
105
110
115
120
0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
Time(ns)
Z(ø)
Impedance 3mm(Without GND)
FX11- 3mm DifferentialTDR
●
Insertion-Loss-to-Crosstalk Ratio (ICR)
The insertion-loss-to-crosstalk
ratio (ICR) with five differential
FEXT aggressors meets the
extrapolated IEEE802.3ap
specification to 10
+
Gbps.
HdaYZg\Veedgi^dc
7dVgYbdjci^c\edgi^dc
8dciVXi
hjg[VXZ AVcY
2015.4w
Stacking height : 2mm Stacking height : 2.5mm, 3mm
■Features
1. Low Profile Design
The board-to-board mating height of 2mm, 2.5mm and 3mm suits
smaller, thinner case designs. (Fig.2)
2. Improved Transmission Efficiency Between Boards
Transmission characteristics have been improved through a design
that fixes ground plates to both sides of the header and receptacle.
3. 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the ground plate connected to
the board Via SMT. The ground stability achieved serves to reduce noise. (Fig.1)
4. Metal Fittings for Added Strength
Metal fittings provide for greater adhesion to the board, which
protects the connector against sheaning forces. The unique
connector design provides a connection between the fitting and the
ground plate for a stronger ground
.
5. Suited to High-Density Applications
The signal contact pitch of 0.5mm affords a compact connector,
and reduces mounting space on the board.
6. Structure Prevents Solder Wicking
A solder gap has been designed into the contact SMT portion to
prevent solder wicking. (Fig.3)
7. High Contact Reliability
Effective wipe length is 0.55mm (2mm height) and 1mm(2.5mm,
3mm height) for signal contacts.
8. Optional Ground Plate
An alternate style is also available without the ground plate. The
space provided by the absence of the ground plate is filled with
additional signal contacts.
Housing
Metal fitting
Signal contact
0.75mm
0.75mm
0.5mm
Ground Plate
Ground plate and metal fitting make contact
10 Signal: 1 Ground Arrangement
Stacking Height Variation
Note: 2.0mm type product cannot be used or interchanged
with the 2.5mm or 3.0mm type product.
Structure Prevent Solder Wicking
FX11 Series
■Signal Integrity Features
●Differential Impedance
The differential impedance is
100 +/- 10ø for FX11 at 50 ps
rise time(20% to 80%).
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm
High-Speed Board-to-Board Connections
Fig.1
Fig.3
Fig.2
'#*!(
bb
'bb
0 1 2 3 4 5 6 7 8 9 10
0
10
20
30
40
50
60
Frequency(GHz)
ICR(dB)
ICR
IEEEspec
ICR 3mm(Without GND)
2
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
Header
Receptacle
Header
Receptacle
Header
Receptacle
Header
Receptacle
Note 1: The thickness of the solder paste is not included in the stacking height.
Note 2: 2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other.
FX11L#-*P / *-SV
2mmFX11L#-*S / *-SV
BStacking height variation
BCross section of mating
FX11#-*P / *-SV
2.5mmFX11#-*S / *-SV
FX11#-*P / *-SV0.5
3mm
FX11L#-*S-SV
FX11L#-*P-SV
2mm
FX11#-*S-SV
FX11#-*P-SV
2.5mm
FX11#-*P-SV0.5
3mm
● Without ground plate
● With ground plate
● Stacking height : 2mm
● Stacking height : 2.5mm, 3mm
<gdjcYedgi^dc
H^\cVaedgi^dc
GZXZeiVXaZ
=ZVYZg
%#** :[[ZXi^kZl^eZaZc\i]
%#** :[[ZXi^kZbVi^c\aZc\i]
H^\cVaedgi^dc <gdjcYedgi^dc
=ZVYZg
GZXZeiVXaZ
& :[[ZXi^kZl^eZaZc\i]
%#. :[[ZXi^kZbVi^c\aZc\i]
(Shown for stacking height 2.5mm type.)
3
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
Rating
4. Vibration resistance
5.
Shock resistance
9.
Solder heat
resistance
Ground plate
Metal fitting
Metal plate
Item
■Product Specifications
Stacking height : 2mm
Note 1: The term “storage” refers to the long-term-storage status of unused items before mounting on the PCB.
The operating temperature/humidity ranges apply to the unmated state after board mounting.
■Materials
Series name
:
FX11L
Form Symbol A
:
With guide post
B
:
Without guide post
Number of contacts Type without ground
Signal/Ground:60/6, 80/8,
100/10, 120/12
Type with ground plate
Signal: 68, 92, 116, 140
Connector type
P
:
Header
S
:
Receptacle
Contact form
SV
:
Straight SMT
Blank, (71): Tray packaging (Without pick-and-place tape)
(21),(91): Embossed tape packaging (Without pick-and-place tape)
(22),(92): Embossed tape packaging (With pick-and-place tape)
1 4
5
6
2
3
Rated current
Rated voltage
0.3 A
50 V AC
Operating temperature range
Operating humidity range
-55 to 85ç
Relative humidity 95% or less
(No condensation)
Storage temperature range
Storage humidity range
-10 to +60ç (Note 1)
-40 to -70% (Note 1)
Part
Insulator
Contacts
Material
LCP
Copper alloy
Phosphor bronze
Phosphor bronze
Phosphor bronze
Finish
Beige
Header
Engagement Area: Gold plating of 0.1μm
Termination Area
: Flash platingReceptacle
Tin plating
Tin plating
Remarks
UL94V-0
----------
----------
----------
----------
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm
in 3 directions, 10 cycles each
Acceleration of 490 m/s2, 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
Temperature of 40ç, humidity of 90 to 95%,
duration 96 h
Temperature: -55
ç
→ 15 to 35
ç
→ 85
ç
→ 15 to 35
ç
Time: 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min. for 5 cycles
50 times
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
100 Mø or greater
No flashover or breakdown
60 mø or less
No electrical discontinuity for 1μs or greater
No damaged, cracked or loose parts
No electrical discontinuity for 1μs or longer
No damaged, cracked or loose parts
Contact resistance of 70 m
ø
or less, insulation resistance of
100 M
ø
or greater, No
damaged, cracked or loose parts
Contact resistance of 70 m
ø
or less, insulation resistance of
100 M
ø
or greater, No
damaged, cracked or loose parts
Contact resistance of 70 mø or less
No damaged, cracked or loose parts
No melting of resin portion which affects performance
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
Requirements Conditions
6.
Humidity
resistance
8.
Mating cycles
7.
Temperature cycle
FX11L # - * P - / * - SV (**)
1 6
4
25
FX11L # - * P - SV (**)
164
235
Type With Ground Plate
Type Without Ground Plate
■Product Number Structure
3
4
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
Yes
With guideposts
Without guideposts
FX11LA-60P/6-SV(71)
FX11LA-80P/8-SV(71)
FX11LA-100P/10-SV(71)
FX11LA-120P/12-SV(71)
FX11LB-60P/6-SV(71)
FX11LB-80P/8-SV(71)
FX11LB-100P/10-SV(71)
FX11LB-120P/12-SV(71)
Part No.
■Header with Ground Plate
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
[Specifications number] – **, (**)
(71) : Tray packaging
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
<j^YZedhi
6¤%#'
%#* %#'¤%#%*
*#'*¤%#(
*#%*¤%#'
&#'¤%#'
%#,* %#,*
+
7¤%#'
8¤%#(
9¤%#&
&#+(¤%#(
%#+
'"¢%#-
¬
8 %#&

%
%#&

%
%#&

%

%
"" %# &
:
9¤%#%*
;b^c
6¤%#%*
%#*¤%#%( %#,*¤%#%( %#,*¤%#%(
&#-
(
)
)
¢%#.¤%#%*
%#'*¤%#%*
(¤%#%*
&+¤%#%* %#,¤%#%(AVcY
%#+¤%#%(BZiVabVh`
%#(¤%#%(AVcY
%#'*¤%#%(BZiVaBVh`
7¤%#%*
(
¢&¤%#%*
*#+*
(#-*
+#,b^c
'#.*
'#'* '

%
""%#&

%
""%#&

%
""%#&
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
4
Recommended metal mask thickness: 0.15 mm
HRS No.
573-0002-7 71
573-0003-0 71
573-0004-2 71
573-0005-5 71
573-0012-0 71
573-0013-3 71
573-0014-6 71
573-0015-9 71
No. of Contacts
Signal Ground
60
80
100
120
60
80
100
120
6
8
10
12
6
8
10
12
A
17.5
23.5
29.5
35.5
17.5
23.5
29.5
35.5
12
18
24
30
12
18
24
30
22.6
28.6
34.6
40.6
22.6
28.6
34.6
40.6
18
24
30
36
----------
----------
----------
----------
19.4
25.4
31.4
37.4
19.4
25.4
31.4
37.4
25.5
31.5
37.5
43.5
25.5
31.5
37.5
43.5
B C D E F Remarks RoHS
Unit : mm
● 2mm stacking height
5
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
6
8
10
12
6
8
10
12
[Specifications number] – **, (**)
(71) : Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
■Receptacle with Ground Plate
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
6¤%#'
7¤%#'
8¤%#(
9¤%#&
%#*
&#'¤%#'&#+*¤%#(%#+
+¤%#'
+#'¤%#(
%#,* %#,*
+
%#'¤%#%*%#*¤%#%*
<j^YZedhi
'"¢%#-
: %#&

%
%#&

%
%#&

%

%
"" %# &
;
9¤%#%*
6¤%#%*
%#*¤%#%( %#,*¤%#%( %#,*¤%#%(
&#-
)
'
¢%#.¤%#%*
&#+*¤%#%*
+
¤
%#%*
)#)
¤
%#%*
&
%#,
¤
%#%(
AVcY
%#+
¤
%#%(
BZiVabVh`
%#(
¤
%#%(
AVcY
%#'*
¤
%#%(
BZiVabVh`
7
¤
%#%*
¢&¤%#%* )
)
'#'
)#-
+#+
(

%
""%#&

%
""%#&

%
""%#&
Recommended metal mask thickness: 0.15 mm
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
HRS No.
573-0102-1 71
573-0103-4 71
573-0104-7 71
573-0105-0 71
573-0112-5 71
573-0113-8 71
573-0114-0 71
573-0115-3 71
Part No.
FX11LA-60S/6-SV(71)
FX11LA-80S/8-SV(71)
FX11LA-100S/10-SV(71)
FX11LA-120S/12-SV(71)
FX11LB-60S/6-SV(71)
FX11LB-80S/8-SV(71)
FX11LB-100S/10-SV(71)
FX11LB-120S/12-SV(71)
No. of Contacts
Signal Ground
60
80
100
120
60
80
100
120
A
17.5
23.5
29.5
35.5
17.5
23.5
29.5
35.5
12
18
24
30
12
18
24
30
25
31
37
43
25
31
37
43
20.8
26.8
32.8
38.8
----------
----------
----------
----------
25.4
31.4
37.4
43.4
25.4
31.4
37.4
43.4
22.2
28.2
34.2
40.2
22.2
28.2
34.2
40.2
B C D E F Remarks RoHS
With guideposts
Without guideposts
Yes
Unit : mm
● 2mm stacking height
1
2
3
4
6
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
FX11LA-68P-SV(**)
FX11LA-92P-SV(**)
FX11LA-116P-SV(**)
FX11LA-140P-SV(**)
FX11LB-68P-SV(**)
FX11LB-92P-SV(**)
FX11LB-116P-SV(**)
FX11LB-140P-SV(**)
68
92
116
140
68
92
116
140
Yes
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
6¤%#'
%#*
&#'¤%#'
*#%*¤%#'
*#'*¤%#(
<j^YZedhi
%#'¤%#%*
7¤%#(
'"¢%#-
8¤%#&
%#+
&#+(¤%#(
:b^c
(
(+#,b^c
7 %#&

%
%#&

%
%#&

%
9

%
"" %# &
8¤%#%*
6¤%#%*
%#*¤%#%(
&#-
¢%#.¤%#%*
%#(¤%#%(AVcY
%#'*¤%#%(
BZiVabVh`
¢&¤%#%*
*#+*
(#-*
'#'*
'
%#,*¤%#%*
'
&

%
""%#&

%
""%#&
Recommended metal mask thickness: 0.15 mm
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
HRS No.
573-0042-1 **
573-0043-4 **
573-0044-7 **
573-0045-0 **
573-0052-5 **
573-0053-8 **
573-0054-0 **
573-0055-3 **
Part No. No. of Contacts
Signal A
16.5
22.5
28.5
34.5
16.5
22.5
28.5
34.5
22.6
28.6
34.6
40.6
22.6
28.6
34.6
40.6
18
24
30
36
----------
----------
----------
----------
19.4
25.4
31.4
37.4
19.4
25.4
31.4
37.4
25.5
31.5
37.5
43.5
25.5
31.5
37.5
43.5
B C D E Remarks RoHS
With guideposts
Without guideposts
Unit : mm
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
● 2mm stacking height
1
2
3
■Header without Ground Plate
7
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
FX11LA-68S-SV(**)
FX11LA-92S-SV(**)
FX11LA-116S-SV(**)
FX11LA-140S-SV(**)
FX11LB-68S-SV(**)
FX11LB-92S-SV(**)
FX11LB-116S-SV(**)
FX11LB-140S-SV(**)
Yes
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
6¤%#'
7¤%#'
8¤%#(
9¤%#&
%#* %#*¤%#%*
%#'¤%#%*
+#'¤%#(
+¤%#'&#+*¤%#(%#+
<j^YZedhi
9
¤
%#%*
6
¤
%#%*
7
¤
%#%*
%#*
¤
%#%(
'¢%#.
¤
%#%*
'#&*
¤
%#%*
%#(¤%#%(
AVcY
%#'*¤%#%(
BZiVabVh`
%#+¤%#%(
BZiVabVh`
%#,¤%#%(
AVcY
)
'#'

%
""%#&

%
""%#&

%
""%#&
)#-
¢&
¤
%#%* '
+#+ %#&

%
&
Recommended metal mask thickness: 0.15 mm
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
HRS No.
573-0142-6 **
573-0143-9 **
573-0144-1 **
573-0145-4 **
573-0152-0 **
573-0153-2 **
573-0154-5 **
573-0155-8 **
Part No. No. of Contacts
Signal
68
92
116
140
68
92
116
140
A
18
24
30
36
18
24
30
36
16.5
22.5
28.5
34.5
16.5
22.5
28.5
34.5
25
31
37
43
25
31
37
43
20.8
26.8
32.8
38.8
----------
----------
----------
----------
B C D Remarks RoHS
With guideposts
Without guideposts
Unit : mm
■Receptacle without Ground Plate
● 2mm stacking height
1
2
8
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
-55 to 85ç
Relative humidity 95% or less
(No condensation)
4. Vibration resistance
5.
Shock resistance
9. Solder heat resistance
■Product Specifications
Stacking height : 2.5mm, 3mm
Note 1: The term “storage” refers to the long-term-storage status of unused items before mounting on the PCB.
The operating temperature/humidity ranges apply to the unmated state after board mounting.
■Materials
■Product Number Structure
Rating
Rated current
Rated voltage
0.3 A
50 V AC
Operating temperature range
Operating humidity range
Storage temperature range
Storage humidity range
-10 to +60ç (Note 1)
-40 to -70% (Note 1)
Part
Insulator
Contacts
Ground plate
Metal fitting
Metal plate
Material
LCP
Copper alloy
Phosphor bronze
Phosphor bronze
Phosphor bronze
Finish
Beige
Header
Engagement Area: Gold plating of 0.1μm
Termination Area: Flash plating
Receptacle
Tin plating
Tin plating
Remarks
UL94V-0
----------
----------
----------
----------
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm
in 3 directions,10 cycles each
Acceleration of 490 m/s2, 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
Temperature of 40ç, humidity of 90 to 95%,
duration 96 h
Temperature: -55
ç
→ 15 to 35
ç
→ 85
ç
→ 15 to 35
ç
Time: 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min. for 5 cycles
50 times
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
100 Mø or greater
No flashover or breakdown
70 mø or less
No electrical discontinuity for 1μs or greater
No damaged, cracked or loose parts
No electrical discontinuity for 1μs or longer
No damaged, cracked or loose parts
Contact resistance of 80 m
ø
or less, insulation resistance
of 100 Mø or greater, No damaged, cracked or loose parts
Contact resistance of 80 m
ø
or less, insulation resistance
of 100 Mø or greater, No damaged, cracked or loose parts
Contact resistance of 80 mø or less
No damaged, cracked or loose parts
No melting of resin portion which affects
performance
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
Item Requirements Conditions
6. Humidity resistance
8.
Mating cycles
7.
Temperature cycle
FX11 # - * P / * - SV 0.5 (**)
FX11 # - * P - SV 0.5 (**)
Type With Ground Plate
Type Without Ground Plate
❶
❶
Number of contacts Type without ground
Signal/Ground:60/6,
80/8, 100/10
Type with ground plate
Signal: 80, 100
Series name
:
FX11
Form Symbol A
:
With guide post
B
:
Without guide post
Connector type
P
:
Header
S
:
Receptacle
Contact form SV
:
Straight SMT
Product height
Blank : Standard
0.5 : Standard + 0.5mm
Blank, (71): Tray packaging (Without pick-and-place tape)
(21),(91): Embossed tape packaging (Without pick-and-place tape)
(22),(92): Embossed tape packaging (With pick-and-place tape)
❹❶
❺
❻
❼
❷
❸
❷
❷
❹
❹
❸
❸
❺
❺❻ ❼
❻❼
9
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
FX11A-60P/06-SV(71)
FX11A-80P/08-SV(71)
FX11A-100P/10-SV(71)
FX11B-60P/06-SV(71)
FX11B-80P/08-SV(71)
FX11B-100P/10-SV(71)
Yes
6
8
10
6
8
10
[Specifications number] – **, (**)
(71) : Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
● 2.5mm stacking height
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
*#'*¤%#(
'#&( ¤%#(%#+ &#'¤%#'
%#*
%#,*
%#,*
'"¢%#- <j^YZedhi
8¤%#(
+
6¤%#'
7¤%#'
9¤%#&
*#%*¤%#'
%#*¤%#%*
%#'¤%#%*
'
)
(
)
(
&
¢&¤%#%*
¢%#.¤%#%*
'#'* %
"%#&
%
"%#&
%
"%#&
9¤%#%*
%#*¤%#%(
6¤%#%*
&#- %#&
%
%#'*¤%#%*
(¤%#%* 7¤%#%*
(#-*
'#.*
*#+* %#&
%
%#+¤%#%(BZiVabVh`
%#,¤%#%(
AVcY %#(¤%#%(AVcY
%#'*¤%#%(BZiVabVh`
%#,*¤%#%(
+¤%#%*
%#,*¤%#%(
+#,b^c
;b^c
8 %#&
%
:%
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
Recommended metal mask thickness: 0.15 mm
HRS No.
573-0502-0 71
573-0503-2 71
573-0504-5 71
573-0512-3 71
573-0513-6 71
573-0514-9 71
Part No. No. of Contacts
Signal Ground
60
80
100
60
80
100
A
17.5
23.5
29.5
17.5
23.5
29.5
12
18
24
12
18
24
22.6
28.6
34.6
22.6
28.6
34.6
18
24
30
----------
----------
----------
19.4
25.4
31.4
19.4
25.4
31.4
25.5
31.5
37.5
25.5
31.5
37.5
B C D E F Remarks RoHS
With guideposts
Without guideposts
Unit : mm
1
2
3
4
■Header with Ground Plate
1
2
3
4
10
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
FX11A-60P/6-SV0.5(71)
FX11A-80P/8-SV0.5(71)
FX11A-100P/10-SV0.5(71)
FX11B-60P/6-SV0.5(71)
FX11B-80P/8-SV0.5(71)
FX11B-100P/10-SV0.5(71)
6
8
10
6
8
10
■Header with Ground Plate
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
[Specifications number] – **, (**)
(71) : Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
+
%#,*%#,*
6¤%#'
7¤%#'
*#%*¤%#'
%#*¤%#%*
%#'¤%#%*
<j^YZedhi
8¤%#(
9¤%#&
*#'*¤%#(
&#'¤%#'
%#+ '#+(¤%#(
%#*
'"¢%#-
+¤%#%*
%#,*¤%#%( %#,*¤%#%(
+#,b^c
8 %#&
%
:%
"%#&
'
)
(
)
(
&
¢&¤%#%*
¢%#.¤%#%*
'#'* %
"%#&
%
"%#&
%
"%#&
9¤%#%*
;b^c
%#*¤%#%(
6¤%#%*
&#- %#&
%
%#'*¤%#%*
(¤%#%* 7¤%#%*
(#-*
'#.*
*#+* %#&
%
%#+¤%#%(BZiVabVh`
%#,¤%#%(
AVcY %#(¤%#%(AVcY
%#'*¤%#%(BZiVabVh`
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
4
Recommended metal mask thickness: 0.15 mm
HRS No.
573-0602-4 71
573-0603-7 71
573-0604-0 71
573-0612-8 71
573-0613-0 71
573-0614-3 71
Part No. No. of Contacts
Signal Ground
60
80
100
60
80
100
A
17.5
23.5
29.5
17.5
23.5
29.5
12
18
24
12
18
24
22.6
28.6
34.6
22.6
28.6
34.6
18
24
30
----------
----------
----------
19.4
25.4
31.4
19.4
25.4
31.4
25.5
31.5
37.5
25.5
31.5
37.5
B C D E F Remarks RoHS
With
guideposts
Without
guideposts
Yes
Unit : mm
● 3mm stacking height
11
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
FX11A-60S/6 SV(71)
FX11A-80S/8 SV(71)
FX11A-100S/10 SV(71)
FX11B-60S/6 SV(71)
FX11B-80S/8 SV(71)
FX11B-100S/10 SV(71)
[Specifications number] – **, (**)
(71) : Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
+
6¤%#'
8¤%#(
9¤%#&
'"¢%#-
7¤%#'
<j^YZedhi
%#* %#*¤%#%*
%#'¤%#%*
&#'¤%#'
+¤%#'
+#'¤%#(
%#,*%#,*
%#+ '#&¤%#(
■Receptacle with Ground Plate
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
: %#&

%
;
%
"%#&
9¤%#%*
6¤%#%*
7¤%#%*
+¤%#%*
%#,*¤%#%(
%#,*¤%#%(
¢&¤%#%*
¢%#.¤%#%*
'#'

%
"%#&
%#*¤%#%(
&#- %#&
%
)#)¤%#%*
%#(¤%#%(
AVcY
%#,¤%#%(AVcY
%#+¤%#%(BZiVabVh`
%#'*¤%#%(
BZiVabVh`
)#-

%
"%#&
)

%
"%#&
+#+ %#&

%
&#+*¤%#%*
))
(
'
Recommended metal mask thickness: 0.15 mm
HRS No.
573-0702-9 71
573-0703-1 71
573-0704-4 71
573-0712-2 71
573-0713-5 71
573-0714-8 71
Part No. No. of Contacts
Signal Ground
60
80
100
60
80
100
6
8
10
6
8
10
A
17.5
23.5
29.5
17.5
23.5
29.5
12
18
24
12
18
24
25
31
37
25
31
37
20.8
26.8
32.8
----------
----------
----------
25.4
31.4
37.4
25.4
31.4
37.4
22.2
28.2
34.2
22.2
28.2
34.2
B C D E F Remarks
RoHS
With guideposts
Without guideposts
Yes
Unit : mm
● 2.5mm, 3mm stacking height
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, totaling 2 places, indicate the metal fittings.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
3
4
12
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
FX11A-80P-SV(**)
FX11A-100P-SV(**)
FX11B- 80P-SV(**)
FX11B-100P-SV(**)
19.5
24.5
19.5
24.5
24.6
29.6
24.6
29.6
20
25
----------
----------
21.4
26.4
21.4
26.4
27.5
32.5
27.5
32.5
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
%#'¤%#%*
6¤%#'
%#*
&#'¤%#'
*#'*¤%#(
*#%*¤%#'
（%#+）'#+( ¤%#(
8¤%#&
7¤%#(
<j^YZedhi
'"¢%#-
■Header without Ground Plate
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
7 %#&

%
9

%
"%#&
8¤%#%*
6¤%#%*
+#,b^c
:b^c
%#(AVcY
¢&¤%#%*
¢%#.¤%#%*
'#'*

%
"%#&
%#*¤%#%(
&#- %#&
%
%#'*¤%#%*
%#'*¤%#%(BZiVabVh`
(#-*

%
"%#&
*#+* %#&

%
'
'
(
&
(
Recommended metal mask thickness: 0.15 mm
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
HRS No.
573-0548-0 **
573-0543-7 **
573-0558-4 **
573-0553-0 **
Part No. No. of Contacts
Signal
80
100
80
100
A B C D E Remarks RoHS
With guideposts
Without guideposts
Yes
Unit : mm
● 2.5mm stacking height
13
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
FX11A-80P-SV0.5(**)
FX11A-100P-SV0.5(**)
FX11B-80P-SV0.5(**)
FX11B-100P-SV0.5(**)
%#'¤%#%*
6¤%#'
%#*
&#'¤%#'
*#'*¤%#(
*#%*¤%#'
（%#+）'#+( ¤%#(
8¤%#&
7¤%#(
<j^YZedhi
'"¢%#-
■Header without Ground Plate
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
7 %#&

%
9

%
"%#&
8¤%#%*
6¤%#%*
+#,b^c
:b^c
%#(AVcY
¢&¤%#%*
¢%#.¤%#%*
'#'*

%
"%#&
%#*¤%#%(
&#- %#&
%
%#'*¤%#%*
%#'*¤%#%(BZiVabVh`
(#-*

%
"%#&
*#+* %#&

%
'
'
(
&
(Recommended metal mask thickness: 0.15 mm
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
HRS No.
573-0648-5 **
573-0643-1 **
573-0658-9 **
573-0653-5 **
Part No. No. of Contacts
Signal
80
100
80
100
A
19.5
24.5
19.5
24.5
24.6
29.6
24.6
29.6
20
25
----------
----------
21.4
26.4
21.4
26.4
27.5
32.5
27.5
32.5
B C D E Remarks RoHS
With guideposts
Without guideposts
Yes
Unit : mm
● 3mm stacking height
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
14
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
FX11A-80S-SV(**)
FX11A-100S-SV(**)
FX11B-80S-SV(**)
FX11B-100S-SV(**)
■Receptacle without Ground Plate
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
6¤%#'
7¤%#(
%#'¤%#%*
8¤%#&
%#*
+#' ¤%#(
&#' ¤%#'
'"¢%#-
+¤%#'
<j^YZedhi
%#+ '#&¤%#(
8¤%#%*
'#' %
"%#&
&#+*¤%#%*
6¤%#%*
:%
"%#&
9
 %#&
%
&#- %#&
%
¢&¤%#%*
%#*¤%#%(
%#(¤%#%( AVcY
)#- %
"%#&
+#+ %#&
%
%#'*¤%#%(BZiVabVh`
¢%#. ¤%#%*
&
'
'
Recommended metal mask thickness: 0.15 mm
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
HRS No.
573-0748-0 **
573-0743-6 **
573-0758-3 **
573-0753-0 **
Part No. No. of Contacts
Signal
80
100
80
100
A
19.5
24.5
19.5
24.5
27
32
27
32
22.8
27.8
----------
----------
27.4
32.4
27.4
32.4
24.2
29.2
24.2
29.2
B C D E Remarks RoHS
With guideposts
Without guideposts
Yes
Unit : mm
● 2.5mm, 3mm stacking height
15
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
JcgZZa^c\Y^gZXi^dc
6¤%#& &#,*¤%#&
7¤%#&
8¤%#(
¢&#* %#&
%
¤%#&'¤%#&
&'¤%#&
%#)
;
%#.
G%#,* %#%*
%
%#'¤%#%*
)
JcgZZa^c\Y^gZXi^dc
6¤%#& &#,*¤%#&
7¤%#&
8¤%#(
¢&#* %#&
%
)¤%#&'¤%#&
&'¤%#& %#.;
%#)
G%#,* %#%*
%
%#'¤%#%*
¢&(¤%#*
¢((%
¢-%
9
:
BEmbossed Carrier Tape Dimensions
20.2
26.2
20.2
26.2
20.2
40.4
52.4
40.4
52.4
40.4
44
56
44
56
44
45.5
59
45.5
59
45.5
50.5
64
50.5
64
50.5
1.98
2.48
2.98
26.2
20.2
20.2
26.2
20.2
52.4
40.4
40.4
52.4
40.4
56
44
44
56
44
59
45.5
45.5
59
45.5
64
50.5
50.5
64
50.5
A B C D E F
Unit : mm
Insertion Connector
FX11L #-60P/6-SV
FX11L #-80P/8-SV
FX11L #- 100P/10 -SV
FX11L #- 120P/12 -SV
FX11L #-68P-SV
FX11L #-92P-SV
FX11L #- 116P-SV
FX11L #- 140P-SV
FX11#-60P/6-SV
FX11#-80P/8-SV
FX11#-100P/10-SV
FX11#-80P -SV
FX11#-100P-SV
FX11#-60P/6-SV0.5
FX11#-80P/8-SV0.5
FX11#-100P/10-SV0.5
FX11#-80P -SV0.5
FX11#-100P-SV0.5
Note 1: There is no polarity in terms of embossed tape packaging
for this product.
Note 2: Left figure is representative of products with ground plates.
20.2
26.2
20.2
26.2
20.2
40.4
52.4
40.4
52.4
40.4
44
56
44
56
44
45.5
59
45.5
59
45.5
50.5
64
50.5
64
50.5
2
2.4526.2
20.2
52.4
40.4
56
44
59
45.5
64
50.5
A B C D E F
Unit : mm
Insertion Connector
FX11L #-60S/6-SV
FX11L #-80S/8-SV
FX11L # -100S/10 -SV
FX11L # -120S/12 -SV
FX11L #-68S-SV
FX11L #-92S-SV
FX11L #- 116S-SV
FX11L #- 140S-SV
FX11#-60S/6-SV
FX11#-80S/8-SV
FX11#-100S/10-SV
FX11#-80S -SV
FX11# -100S-SV
Note 1: There is no polarity in terms of embossed tape packaging
for this product.
Note 2: Left figure is representative of products with ground plates.
●Header
●Receptacle
●Reel Dimensions
16
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
BRecommended Temperature Profile
HRS test conditions
Test boardGlass epoxy 60mm∞35mm∞1.6mm thick
Solder method : Reflow
Solder composition : Paste,96.5%Sn/ 3%Ag/ 0.5%Cu
Metal mask : 0.15mm thick
Reflow cycles : 2 cycles
The temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board size/thickness. Consult your solder paste and
equipment manufacturer for specific recommendations.
Note : The temperature profile indicates the maximum temperature
of the connector surfaces at the highest point from the PCB
mounting surface.
Temperature (ç)
150ç
200ç
220ç
Soldering
(220ç min)
140
180
220
0
160
200
(MAX250ç)
240
260
(90 to 120 sec.)
(60 sec. max.)
Preheating(150 to 200ç)
Time(sec.)
8dccZXidgl^Yi]Y^gZXi^dc 8dccZXidgaZc\i]Y^gZXi^dc
7dVgY 7dVgY
2. Compatibility
2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other.
3. Retension of Boards
Avoid the support of boards by connectors alone and adopt a board locking measure that does not rely on the connectors.
4. Solder Repair
Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair.
This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken
into consideration prior to connector washing.
5. Miscellaneous
·
Note that excessive twisting while inserting or withdrawing connectors will cause damage.
·
The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance.
BConnector Handling Precautions
1. Allowable Creepage Dimensions at Time of Mating
[Stacking height : 2mm]
The effective coupling length of this product is 0.55 mm for
the signal portion and the ground portion. The creepage of
the header and receptacle at the time of mating should be
within 0.18 mm of the completely coupled condition.
[Stacking height : 2.5mm, 3mm]
The effective coupling length of this product is 1 mm for the
signal portion and 0.9mm for the ground portion. The
creepage of the header and receptacle at the time of mating
should be within 0.4 mm of the completely coupled condition.
BWashing Conditions
Water Type Washing
When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the
documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
Washing Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give
rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing
has been performed.
Organic Solvent Washing
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 04/2015. Contents are subject to change without notice for the purpose of improvements.
Solvent
Room temperature washing
Heated washing
IPA(Isopropyl alcohol) Yes Yes
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hirose Electric:
FX11LA-116P-SV FX11LA-68P-SV FX11LA-68S-SV FX11LB-116P-SV FX11LB-116S-SV FX11LB-68P-SV
FX11LB-68S-SV FX11LB-92S-SV FX11LA-60P/6-SV(71) FX11LA-60P/6-SV(91) FX11LA-60P/6-SV(92) FX11LA-
80P/8-SV(71) FX11LA-80P/8-SV(91) FX11LA-80P/8-SV(92) FX11LA-100P/10-SV(71) FX11LA-100P/10-SV(91)
FX11LA-100P/10-SV(92) FX11LA-120P/12-SV(71) FX11LA-120P/12-SV(91) FX11LA-120P/12-SV(92) FX11LB-
60P/6-SV(71) FX11LB-60P/6-SV(91) FX11LB-60P/6-SV(92) FX11LB-80P/8-SV(71) FX11LB-80P/8-SV(91) FX11LB-
80P/8-SV(92) FX11LB-100P/10-SV(71) FX11LB-100P/10-SV(91) FX11LB-100P/10-SV(92) FX11LB-120P/12-SV(71)
FX11LB-120P/12-SV(91) FX11LB-120P/12-SV(92) FX11LA-68P-SV(21) FX11LA-68P-SV(22) FX11LA-92P-SV
FX11LA-92P-SV(21) FX11LA-92P-SV(22) FX11LA-116P-SV(21) FX11LA-116P-SV(22) FX11LA-140P-SV FX11LA-
140P-SV(21) FX11LA-140P-SV(22) FX11LB-68P-SV(21) FX11LB-68P-SV(22) FX11LB-92P-SV FX11LB-92P-SV(21)
FX11LB-92P-SV(22) FX11LB-116P-SV(21) FX11LB-116P-SV(22) FX11LB-140P-SV FX11LB-140P-SV(21)
FX11LB-140P-SV(22) FX11LA-60S/6-SV(71) FX11LA-60S/6-SV(91) FX11LA-60S/6-SV(92) FX11LA-80S/8-SV(71)
FX11LA-80S/8-SV(91) FX11LA-80S/8-SV(92) FX11LA-100S/10-SV(71) FX11LA-100S/10-SV(91) FX11LA-100S/10-
SV(92) FX11LA-120S/12-SV(71) FX11LA-120S/12-SV(91) FX11LA-120S/12-SV(92) FX11LB-60S/6-SV(71) FX11LB-
60S/6-SV(91) FX11LB-60S/6-SV(92) FX11LB-80S/8-SV(71) FX11LB-80S/8-SV(91) FX11LB-80S/8-SV(92) FX11LB-
100S/10-SV(71) FX11LB-100S/10-SV(91) FX11LB-100S/10-SV(92) FX11LB-120S/12-SV(71) FX11LB-120S/12-
SV(91) FX11LB-120S/12-SV(92) FX11LA-68S-SV(21) FX11LA-68S-SV(22) FX11LA-92S-SV FX11LA-92S-SV(21)
FX11LA-92S-SV(22) FX11LA-116S-SV FX11LA-116S-SV(21) FX11LA-116S-SV(22) FX11LA-140S-SV FX11LA-
140S-SV(21) FX11LA-140S-SV(22) FX11LB-68S-SV(21) FX11LB-68S-SV(22) FX11LB-92S-SV(21) FX11LB-92S-
SV(22) FX11LB-116S-SV(21) FX11LB-116S-SV(22) FX11LB-140S-SV FX11LB-140S-SV(21) FX11LB-140S-SV(22)
FX11A-60P/6-SV(71) FX11A-60P/6-SV(91) FX11A-60P/6-SV(92) FX11A-80P/8-SV(71)