PAGE . 1
June 27,2012-REV.00
ES1AWG SERIES
FEATURES
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Easy pick and place
• Superfast recovery times for high efficiency
• Plastic package has Underwriters Laboratory
Fla mmability Cla ssification 94V-O
• Glass pa ssivated junction
• Lead free in comply with EU RoHS 2002/95/EC directives
MECHANICAL DAT A
• Ca se: JEDEC DO-214AC molded plastic
• Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
• Polarity: Indicated by cathode band
• Standard packaging: 12mm tape (EIA-481)
• Weight: 0.0023 ounce, 0.0679 gram
SURF ACE MOUNT SUPERF AST RECTIFIER
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
NOTES:
1.Mounted on an FR4 PCB, single-sided copper, mini pad.
2.Mounted on an FR4 PCB, single-sided copper, with 76.2 x 114.3mm copper pad area.
3.Reverse Recovery Tset Conditions: IF=0.5A,IR=1.0A,Irr=0.25A.
50 to 600 Volts 1.0 Ampere
CURRENT
VOLTAGE
PARAMETER SYMBOL ES1AWG ES1BWG ES1CWG ES1DWG ES1EWG ES1GWG ES1JWG UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 150 200 300 400 600 V
Maximum RMS Voltage V
RMS
35 70 105 140 210 280 420 V
Maximum DC Blocking Voltage V
DC
50 100 150 200 300 400 600 V
Maximum Average Forward Current I
F(AV)
1A
Peak Forward Surge Current : 8.3ms single half sine-wave
superimposed on rated load (JEDEC method) I
FSM
30 A
Maximum Forward Voltage at 1A V
F
0.95 1.25 1.7 V
Maximum DC Reverse Current at Rated DC Blocking
Voltage I
R
1μA
Typical Junction Capacitance C
J
18 pF
Typical Thermal Resi stance (Note 1)
(Note 2) R
θJA
R
θJL
150
22
O
C / W
Maximum Reverse Recovery Time (Note 3) t
rr
35 ns
Operating Junction and Storage Temperature Range T
J
,T
STG
-55 to +150
O
C
PAGE . 2
June 27,2012-REV.00
ES1AWG SERIES
0
0.2
0.4
0.6
0.8
1
1.2
0 25 50 75 100 125 150
TC, Case Temperature (°C)
IF, Forward Current (A)
Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance
1
10
100
0.1 1 10 100
VR, Reverse Bias Voltage (V)
CJ, Junction Capacitance (pF)
ES1AWG~ES1DWG
ES1JWG ES1GWG
Fig.4 Typical Forward Characteristics
0.01
0.1
1
10
0.2 0.4 0.6 0.8 1
IF, Forward Current (A)
TJ = 125°C
ES1AWG~ES1DWG
TJ = 75°C
TJ = 150°C
TJ = 25°C
Fig.5 Typical Forward Characteristics
0.01
0.1
1
10
0.2 0.4 0.6 0.8 1 1.2
VF, Forward Voltage (V)
IF, Forward Current (A)
TJ = 125°C
ES1GWG
TJ = 150°C
TJ = 25°C
TJ = 75°C
Fig.6 Typical Forward Characteristics
0.01
0.1
1
10
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
VF, Forward Voltage (V)
IF, Forward Current (A)
TJ = 125°C
ES1JWG
TJ = 150°C
TJ = 25°C
TJ = 75°C
Fig.3 Typical Reverse Characteristics
0.01
0.1
1
10
20 40 60 80 100
IR, Reverse Current (uA)
TJ = 25°C TJ = 75°C TJ = 125°C
TJ = 150°C
VF, Forward Voltage (V)
Percent of Rated Peak Reverse Voltage (%)
PAGE . 3
June 27,2012-REV.00
ES1AWG SERIES
MOUNTING PAD LAYOUT
ORDER INFORMA TION
• Packing information
T/R - 7.5K per 13" plastic Reel
T/R - 1.8K per 7" plastic Reel
PAGE . 4
June 27,2012-REV.00
ES1AWG SERIES
Part No_pa cking code_Version
ES1AWG_R1_00001
ES1AWG_R1_10001
ES1AWG_R2_00001
ES1AWG_R2_10001
For example :
RB500V-40_R2_00001
Part No. Serial number
Version code means HF
Packing size code means 13"
Packing type means T/R
Packing Code XX Version C o de XXXXX
Packing type 1
st
Code Pac king size co d e 2
nd
Code HF or RoHS 1
st
Code 2
nd
~5
th
Code
Tape and Ammunition Box
(T/B) AN/A 0HF 0 s er ial number
Tape and R e el
(T/R) R7" 1RoHS 1 s er ial number
B ulk Pa cking
(B/P) B13" 2
Tu be P ack in g
(T/P) T26mm X
Tape and Reel (Right Oriented)
(TRR) S52mm Y
Tape and Reel (Left Oriented)
(TRL) LPANASERT T/B CATHODE UP
(PBCU) U
FORMING FPANASERT T/B CATHODE DOWN
(PBCD) D
PAGE . 5
June 27,2012-REV.00
ES1AWG SERIES
Disclaimer
•Re producing a nd modifying information of the document is prohibited without permission
from Panjit International Inc..
•Pa njit International Inc. reserves the rights to ma ke cha nges of the content herein the
document a nytime without notif ication. Please refer to our website for the late st
document.
Pa njit Internation al Inc. disclaims a ny a nd all lia bility arising out of the a pplication or use of
a ny product including da mages incidentally and consequentially occurred.
•Pa njit International Inc. does not a ssume a ny a nd all implied warra nties, including warra nties
of fitne ss for particular purpose, non-infringement a nd mercha ntability.
•Applications shown on the herein document are examples of sta ndard use a nd operation.
Customers are responsible in comprehending the suita ble use in particular applications.
Pa njit International Inc. ma kes no representation or warra nty that such a pplications will be
suitable for the specified use without further testing or modification.
•The products shown herein are not de signed a nd authorized for equi pments requiring high
level of relia bility or relating to huma n life a nd for a ny a pplication s concerning life-saving
or life-sustaining, such a s medical in struments, tra nsportation equi pment, aerospa ce
ma chinery et cetera. Customers using or selling these products f or use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
•
