https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 58mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3. Screw connection. Your advantages Mechanically compatible with the DIN rail connector Various output characteristic curves compatible with standard solenoid valves Loop-powered: the required power is supplied via the control signal on the input side. Installation in zone 2, protection type "n" (EN 60079-15) permitted Up to SIL 3 according to IEC61508 2-way electrical isolation Input: 19.2VDC...30VDC Output [Ex ia] IIB Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356160575 Weight per Piece (excluding packing) 160.000 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area 08/25/2020Page1/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Technical data Dimensions Width 12.5 mm Height 112.5 mm Depth 113.7 mm Ambient conditions Ambient temperature (operation) -40 C ... 60 C (any mounting position, pay attention to the derating curve in the data sheet) Ambient temperature (storage/transport) -40 C ... 80 C Maximum altitude 2000 m Permissible humidity (operation) 10 % ... 95 % (non-condensing) Degree of protection IP20 (not assessed by UL) Noise immunity EN 61000-6-2 Output data Output characteristic curve: Output resistor 133.4 (Internal resistance Ri) Response time 20 ms Compatible valves Note This is an extract of possible combinations of valves and solenoid drivers. Compatible valve ASCO Coil 302 (12 V) ASCO Coil 302 (24 V) Burkert Coil AC 10 standard Burkert Coil AC 10 high resistance FESTO Coil MFH-...IA-SA-EX GBXE022AIAD03 FESTO Coil (J)MFH-...BIA-SA-EX GBXE022AIAD03 Norgren Herion Coil 2050 Norgren Herion Coil 2051 Norgren Herion Coil 2052 Norgren Herion Coil 2053 Parker Coil VZ95 482160.01 EEx ia IIB T6 Power supply Power dissipation < 1.325 W Connection data Connection method Screw connection Stripping length 7 mm Screw thread M3 Conductor cross section solid 0.2 mm ... 2.5 mm Conductor cross section flexible 0.2 mm ... 2.5 mm 08/25/2020Page2/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Technical data Connection data Conductor cross section AWG 24 ... 14 Torque 0.5 Nm ... 0.6 Nm General No. of channels 1 Maximum temperature coefficient 0.01 %/K Status display Yellow LED (switching state / status, lights up when output circuit is active) Degree of pollution 2 Overvoltage category II Electromagnetic compatibility Conformance with EMC directive Interference emission EN 61000-6-4 Housing material PA 6.6-FR Color gray Designation Output/input Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11) Safety characteristic data Integrity requirement IEC 61508 - Low demand Equipment type Type A Safety Integrity Level (SIL) 3 Safe Failure Fraction (SFF) 100 % SU 2.84 x 10 (284 FIT) SD 0 DU 0 DD 0 Probability of a hazardous failure on demand (PFDAVG) 0 (1 year) -7 0 (5 years) 0 (10 years) Diagnostic coverage (DC) DCS=0 %, DCD=0 % Safety data Input power Pi negligible Max. internal inductance Li negligible Max. internal capacitance Ci negligible Max. output voltage Uo 25.1 V Max. output current Io 188 mA Max. output power Po 1.18 W Group IIB/IIIC 08/25/2020Page3/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Technical data Safety data Max. external inductivity Lo 4 mH Max. external capacitance Co 0.83 F Additional text simple circuit Group IIB/IIIC Max. external inductivity Lo 2 mH Max. external capacitance Co 300 nF Additional text mixed circuit Group IIB/IIIC Max. external inductivity Lo 1 mH Max. external capacitance Co 370 nF Additional text mixed circuit Group IIB/IIIC Max. external inductivity Lo 0.5 mH Max. external capacitance Co 460 nF Additional text mixed circuit Group IIB/IIIC Max. external inductivity Lo 0.1 mH Max. external capacitance Co 790 nF Additional text mixed circuit Safety-related maximum voltage Um 253 VAC (125 V DC) Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Conformance CE-compliant, additionally EN 61326 ATEX II (1) G [Ex ia Ga] IIB/IIA II (1) D [Ex ia Da] IIIC II 3 (1)G Ex nA [ia IIB Ga] IIC T4 Gc X IECEx [Ex ia Ga] IIB/IIA [Ex ia Da] IIIC Ex nA [ia IIB Ga] IIC T4 Gc UL, USA/Canada Class I Div 2; IS for Class I, II, III Div 1 DNV GL-Temperature B DNV GL-Humidity B DNV GL-Vibration A DNV GL-EMC A 08/25/2020Page4/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Technical data Standards and Regulations DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board Group IIB/IIIC IIB/IIIC IIB/IIIC IIB/IIIC IIB/IIIC Conformance/approvals Designation CE Identification CE-compliant Additional text and EN61326 Designation ATEX Identification II (1) G [Ex ia Ga] IIB/IIA II (1) D [Ex ia Da] IIIC II 3 (1)G Ex nA [ia IIB Ga] IIC T4 Gc X Certificate IBExU 07 ATEX 1133X Designation IECEx Identification [Ex ia Ga] IIB/IIA [Ex ia Da] IIIC Ex nA [ia IIB Ga] IIC T4 Gc Certificate IECEx IBE 08.0002X Designation UL, USA/Canada Identification UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T4 Class I, Div. 2, Groups IIC, IIB, IIA T4 Associated apparatus for use in Class I, Division 1, Groups C,D Associated apparatus for use in Class II, Div.1 Groups E,F,D Associated apparatus for use in Class III, Division 1 Associated apparatus for use in Class I, Zone 0,1,2, Groups IIB, IIA Certificate , C.D.-No 83104549 Designation UL, USA/Canada Identification Class I Div 2; IS for Class I, II, III Div 1 Certificate , C.D.-No 83104549 Designation Shipbuilding approval Certificate DNV GL TAA000020C Designation Safety Integrity Level (SIL, IEC61508) Identification 3 08/25/2020Page5/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Technical data Conformance/approvals Designation INMETRO Identification [Ex ia Ga] IIB/IIA [Ex ia Da] IIIC Ex nA [ia IIB Ga] IIC T4 Gc Certificate DNV 18.0115 X Designation EACEx Identification [Ex ia Ga] IIC [Ex ia Da] IIIC Certificate RU C-DE.AB72.B.00093/19 Temperature B Humidity B Vibration A EMC A Enclosure Required protection according to the Rules shall be provided upon installation on board Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 08/25/2020Page6/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Block diagram 08/25/2020Page7/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Diagram Dimensional drawing 08/25/2020Page8/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Classifications eCl@ss eCl@ss 10.0.1 27210120 eCl@ss 4.0 27210100 eCl@ss 4.1 27210100 eCl@ss 5.0 27210100 eCl@ss 5.1 27210100 eCl@ss 6.0 27210100 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 4.0 EC002653 ETIM 5.0 EC002653 ETIM 6.0 EC002653 ETIM 7.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 UNSPSC 18.0 39121008 UNSPSC 19.0 39121008 UNSPSC 20.0 39121008 UNSPSC 21.0 39121008 Approvals Approvals Approvals DNV GL / UL Listed / cUL Listed / Functional Safety / UL Listed / cUL Listed / DNV GL / Functional Safety Ex Approvals IECEx / ATEX / UL Listed / cUL Listed / INMETRO / EAC Ex / IECEx / ATEX / UL Listed / cUL Listed / EAC Ex / INMETRO 08/25/2020Page9/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Approvals Approval details DNV GL https://approvalfinder.dnvgl.com/ TAA000020C UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267 16/04-017 R025 V1R1 Functional Safety UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267 DNV GL https://approvalfinder.dnvgl.com/ TAA000020C 16/04-017 R025 V1R1 Functional Safety Accessories Accessories Device marking 08/25/2020Page10/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Accessories Plastic label-UC-EMLP (11X9)-0819291 Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Plastic label-UC-EMLP (11X9) YE-0822602 Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Plastic label-UC-EMLP (11X9) SR-0828094 Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Plastic label-US-EMLP (11X9)-0828789 Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 Plastic label-US-EMLP (11X9) YE-0828871 Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 08/25/2020Page11/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Accessories Plastic label-US-EMLP (11X9) SR-0828872 Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 Device marker-LS-EMLP (11X9) WH-0831678 Device marker, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 Device marker-LS-EMLP (11X9) YE-0831732 Device marker, Sheet, yellow, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 Device marker-LS-EMLP (11X9) SR-0831705 Device marker, Sheet, silver, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 Insulating sleeve Insulating sleeve-MPS-IH BK-0201731 Insulating sleeve, color: black 08/25/2020Page12/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Accessories Insulating sleeve-MPS-IH GY-0201728 Insulating sleeve, color: gray Insulating sleeve-MPS-IH GN-0201702 Insulating sleeve, color: green Insulating sleeve-MPS-IH YE-0201692 Insulating sleeve, color: yellow Insulating sleeve-MPS-IH BU-0201689 Insulating sleeve, color: blue Insulating sleeve-MPS-IH RD-0201676 Insulating sleeve, color: red 08/25/2020Page13/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Accessories Insulating sleeve-MPS-IH WH-0201663 Insulating sleeve, color: white Labeled device marker Plastic label-UC-EMLP (11X9) CUS-0824547 Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm Plastic label-UC-EMLP (11X9) YE CUS-0824548 Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm Plastic label-UC-EMLP (11X9) SR CUS-0828098 Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Module carrier Module carrier-TC-D37SUB-ADIO16-EX-P-UNI-2924854 Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via DSUB connector, 37-pos. (1:1 connection) 08/25/2020Page14/15 https://www.phoenixcontact.com/us/products/2865515 Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515 Accessories Module carrier-TC-D37SUB-AIO16-EX-PS-UNI-2902932 Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via DSUB connector, 37-pos. (1:1 connection), with HART multiplexer connection Power module Power and error message module-MACX MCR-PTB-2865625 Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector Power and error message module-MACX MCR-PTB-SP-2924184 Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector Test plug terminal block Test plugs-MPS-MT-0201744 Test plugs, with solder connection up to 1 mm conductor cross section, color: gray Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 08/25/2020Page15/15