600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
FEATURES
! OPTIMIZED FOR LAN PROTECTION APPLICATION
! IDEAL FOR ESD PROTECTION OF DATA LINES IN ACCORDANCE
WITH IEC 1000-4-2(IEC801-2)
! IDEAL FOR EFT PROTECTION OF DATA LINE IN ACCORDANCE
WITH IEC 1000-4-4(IEC801-4)
! EXCELLENT CLAMPING CAPABILITY
! LOW INCREMENTAL SURGE RESISTANCE
! FAST RESPONSE TIME:TYPICALLY LESS THAN 1.0 ps FROM
0 VOLTS TO V(BR) MIN
! 600 W PEAK PULSE POWER CAPABILITY WITH A 10/1000 µS
WAVEFORM , REPETITION RATE (DUTY CYCLE)︰0.01%
! TYPICAL I D LESS THAN 1µA ABOVE 10V
! HIGH TEMPER ATURE SOLDERING GUARAN TEED:250℃/10 S E CONDS
AT TERMINAL
MECHANICAL DATA
! CASE:MOLDED PLASTIC
! TERMIN ALS:SOLDER PLATED
! P OLARITY:INDICATED BY CATHODE BAND CASE:DO-214AA(SMB)
! WEIGHT:0.093 GRAMS DIMENSIONS IN INCHES AND (MILLIMETERS)
MAXIMUM RATINGS AND ELECTRI CAL CH ARACTERISTICS
RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
RATINGS SYMBOL VALUE UNITS
PEAK PULSE POWER DISSIPATION ON 10/1000µS WAVEFORM
(NOTE 1, FIG. 1) PPPM MINIMUM 600 WATTS
PEAK PULSE CURRENT OF 0N 10/1000µS WAVEFORM
(NOTE 1,FIG. 3) IPPM SEE TABLE 1 A
STEADY STATE POWER DISSIPATION AT TL=75℃
(NOTE 2) PM(AV) 1.0 WATTS
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD, UNIDIRECTIONAL
ONLY(NOTE 2) IFSM 100 A
MAXIMUM IN STANTANEO US FORWARD VO LTAGE AT 2 5. 0A F OR
UNIDIRECTIONAL ONLY (NOTE 3 & 4) VF SEE NOTE 4 V
OPERATING JUNCTION AND STORAGE TEMPERATURE RANGE TJ,TSTG - 55 TO + 150 ℃
NOTE︰ 1.NON-REPE TITIVE CURRENT P ULSE, PER FIG.3 AND DERATED ABOVE TA=25℃PER FIG 2.
2. MOUNTED ON 5mm2 COPPE R PADS TO EACH TERMINAL
3. MEASURED ON 8.3 mS SINGLE HALF SINE-WAVE OR EQUIVALENT SQUARE WAVE, DUTY CYCLE = 4 PULSES
PER MINUTE MAXIMUM
4. VF=3.5V ON P6SMBJ5.0 THRU P6SMBJ90 DEVICES AND VF=5.0V ON P6SMBJ100 THRU P6SMBJ170
P6SMBJ5.0
THRU
P6SMBJ170A
.060(1.52)
.030(0.76)
.220(5.59)
.205(5.21)
.096(2.44)
.084(2.13)
.180(4.57)
.160(4.06)
.155(3.94)
.130(3.30)
.086(2.20)
.077(1.96)
CATHODE
Formosa MS